13. FUNCTION TO SIMPLIFY
PROGRAMMING B–63682EN/01
NC FUNCTION
92
Specify a command prior to the punching command for a single plate.
G98X xb Y yb I lx J ly P nx K ny ;
xb : X axis coordinates values in the multi–piece machining
base point (B of Fig.)
yb : Y axis coordinates values in the multi–piece machining
base point (B of Fig.)
lx : X axis direction length (Give by the positive number) of
one product
ly : Y axis direction length (Give by the positive number) of
one product
nx : The number of products in the X axis direction (Caution)
ny : The number of products in the Y aixs direction
(Caution)
CAUTION
Product board (in Fig 13.6) is not included in the number.
After a G98 command, specify the punching command for a single plate
at the lower left ( in Fig 13.6) which performs the multi–piece
machining function operation at grid intervals, using a macro function
(storing a machining command between U and V commands).
:
G92X_Y_ ;
G98X_Y_I_J_P_K_ ;
Punching command for a single plate at the lower left
13.6.1
Base Point Command
of Multi–piece
Machining
Format
D Command method