2. HARDWARE
B−63085EN/02
150
3)−3 For the 7.2² and 9.5² LCD units (monochrome) manufactured by
Hitachi
Remove the three brackets from the left part on the front of the LCD
unit, and remove the cover. Then, the backlight is exposed. Replace
the backlight with a new one.
Connector
Bracket
Display surface of LCD unit
Backlight
3)−4 For the 7.2² LCD unit (monochrome) manufactured by Sharp
Remove the three screws from the left part on the front of the LCD
unit, and remove the cover. Then, the backlight is exposed. Replace
the backlight with a new one.
Connector
Display surface of LCD unit
Backlight
4) Upon completion of replacement, reassemble the unit by reversing
the steps 1 through 3 above.