APPENDIX
B−63085EN/02
A. ALARM LIST
347
Number ContentsMessage
5138 FSSB : AXIS SETTING NOT COM-
PLETE
In automatic setting mode, axis setting has not been made yet.
Perform axis setting on the FSSB setting screen.
5197 FSSB : OPEN TIME OUT The CNC permitted FSSB to open, but FSSB was not opened.
5198 FSSB : ID DATA NOT READ Temporary assignment failed, so amplifier initial ID information could not
be read.
(2) Background edit alarm
Number Message Contents
??? BP/S alarm BP/S alarm occurs in the same number as the P/S alarm that occurs in
ordinary program edit. (070, 071, 072, 073, 074 085,086,087 etc.)
140 BP/S alarm It was attempted to select or delete in the background a program being
selected in the foreground. (NOTE)
Use background editing correctly.
NOTE
Alarm in background edit is displayed in the key input line of the background edit screen instead
of the ordinary alarm screen and is resettable by any of the MDI key operation.
(3) Absolute pulse coder (APC) alarm
Number Message Contents
300 nth−axis origin return Manual reference position return is required for the nth−axis (n=1 to 4).
301 APC alarm: nth−axis communication nth−axis (n=1 to 4) APC communication error. Failure in data transmis-
sion
Possible causes include a faulty APC, cable, or servo interface module.
302 APC alarm: nth−axis over time nth−axis (n=1 to 4) APC overtime error.
Failure in data transmission.
Possible causes include a faulty APC, cable, or servo interface module.
303 APC alarm: nth−axis framing nth−axis (n=1 to 4) APC framing error. Failure in data transmission.
Possible causes include a faulty APC, cable, or servo interface module.
304 APC alarm: nth−axis parity nth−axis (n= 1 to 4) APC parity error.
Failure in data transmission.
Possible causes include a faulty APC, cable, or servo interface module.
305 APC alarm: nth−axis pulse error nth−axis (n=1 to 4) APC pulse error alarm.
APC alarm.APC or cable may be faulty.
306 APC alarm: nth−axis battery
voltage 0
nth−axis (n=1 to 4) APC battery voltage has decreased to a low level so
that the data cannot be held.
APC alarm. Battery or cable may be faulty.
307 APC alarm: nth−axis battery low 1 nth−axis (n=1 to 4) axis APC battery voltage reaches a level where the
battery must be renewed.
APC alarm. Replace the battery.
308 APC alarm: nth−axis battery low 2 nth−axis (n=1 to 4) APC battery voltage has reached a level where the
battery must be renewed (including when power is OFF).
APC alarm .Replace battery.
309 APC ALARM:
n AXIS ZRN IMPOSSIBL
Return to the origin has been attempted without first rotating the motor
one or more times. Before returning to the origin, rotate the motor one
or more times then turn off the power.