7. PARAMETERS
309
03116 Clear of ALM100, setting of screen display
#2 PWR: ALM100 (parameter enable) is cleared by
<CAN> + <RESET> key (0)/<RESET> key (1)
#4 FOV : In the field of specified feedrate F on the
program check screen, the specified feedrate
is displayed(0)/(Specified feedrate)(override)
is displayed(1)
#5 COA : While an external alarm state is present or
while an external message is being displayed,
automatic screen erasure is, performed(0)/not
performed(1)
#6 T8D : T codes that are always displayed are
displayed with, four digits(0)/eight digits(1)
#7 MDC : Maintenance information by operating soft key,
all clear disable(0)/all clear enable(1)
03117 Setting of screen display
#0 SMS : On the program check screen, the soft key to
enable or disable the graph of spindle speed
and load is, not displayed(0)/displayed(1)
#1 SPP : On the diagnostic screen, spindle position data
is not displayed (0)/ displayed (1) (DGN445 to
447)
#7 P9D : The format of the screen displayed on the PC
side by the CNC screen display function is,
14–inch type(0)/9–inch type(1)
(This parameter is valid when the NC is not
equipped with a display unit.)
M series
T series
03118 Actual spindle speed and maintenance
information display
#0–4 AS1–AS4 :
When the actual spindle speeds (SACT) of the
first to fourth spindles are displayed, each
value is the value calculated from the position
coder (0)/the value calculated from the spindle
motor speed (1)
03119 Displayed language, touch panel T series
#0 DAN : Display in Danish is disabled (0)/enabled (1)
#1 POR : Display in Portuguese is disabled (0)/enabled
(1)
#2 DDS : The support of the touch panel on the display
is enabled (0)/disabled (1)
#3 TPA : Touch panel connection is disabled (0)/enabled
(1)
#4 F2K : As the LCD/MDI keyboard, Symbol CAPi T
combined with a unified standard keyboard is,
not used(0)/used(1)
#7 NVG : When a color display device is used, VGA
mode is used (0)/not used (1) (conventional
type)
PRM3102
T series
03120 Time from the output of an alarm to the
termination of sampling [msec]