7
7.2 Parameter List
352
04800 Synchronization control of serial spindle
#0–#3 ND1–ND4:
In controlling the spindle synchronization, the
direction of the first to fourth spindle motors
rotation is the direction indicated by the
command sign (0)/the opposite direction (1)
#6 EPZ : If an axis of Cs contour control is used under
simple synchronous spindle control,
positioning to an axis of Cs contour control
immediately after the parking signal is switched
is performed by, usual positioning
operation(0)/positioning operation including
reference position return(1).
#7 SPK : As the parking signals for simple spindle
synchronous control PKESS1 <G122#6> and
PKESS2 <G122#7> are used (0)/PKESS1
<G031#6> and PKESS2 <G031#7> are used
(1)
04810 Error pulse between two spindles when phase
synchronizing in the serial spindle
synchronization control mode
04811 Allowable error count for the error pulse
between two spindles in the serial spindle
synchronization control mode
04821 Master axis of first spindle under simple
synchronous spindle control
PRM
3704#5
04822 Master axis of second spindle under simple
synchronous spindle control
04823 Master axis of third spindle under simple
synchronous spindle control
04824 Master axis of fourth spindle under simple
synchronous spindle control
04826 Permissible synchronization error under simple
synchronous spindle control in which the first
spindle is the slave axis
PRM
3704#5
04827 Permissible synchronization error under simple
synchronous spindle control in which the
second spindle is the slave axis
<F043
#0–#3>
04828 Permissible synchronization error under simple
synchronous spindle control in which the third
spindle is the slave axis
04829 Permissible synchronization error under simple
synchronous spindle control in which the fourth
spindle is the slave axis