7. PARAMETERS
371
05356 Positional deviation limit imposed while the
tapping axis is stopped in rigid tapping using
the third spindle [Detection unit]
05357 Positional deviation limit imposed while the
spindle is stopped in rigid tapping using the
third spindle [Detection unit]
05365 Bell–shaped acceleration/deceleration time
constant for the first spindle in rigid tapping
(first–stage gear) [ms]
M series
05366 Bell–shaped acceleration/deceleration time
constant for the first spindle in rigid tapping
(second–stage gear) [ms]
05367 Bell–shaped acceleration/deceleration time
constant for the first spindle in rigid tapping
(third–stage gear) [ms]
05369 Bell–shaped acceleration/deceleration time
constant for the second spindle in rigid tapping
(first–stage gear) [ms]
M series
05370 Bell–shaped acceleration/deceleration time
constant for the second spindle in rigid tapping
(second–stage gear) [ms]
05373 Bell–shaped acceleration/deceleration time
constant for the third spindle in rigid tapping
(first–stage gear) [ms]
M series
05374 Bell–shaped acceleration/deceleration time
constant for the third spindle in rigid tapping
(second–stage gear) [ms]
05381 Override value during rigid tapping return
[1%/10%]
M series
PRM
5200#4,
5201#3
05382 Amount of return for rigid tapping return M series