8. ALARM LIST
529
Message
Faulty location/
corrective action
Contents
INPUT INVALID Enter correct data. There is an incorrect input
data.
Nonnumerical value was in-
putted with COPY, INSLIN,
C–UP, C–DOWN etc.
The input address was spe-
cified for write coil.
An illegal character was
specified for the data table.
NET TOO LARGE Please reduce the net un-
der editing.
The input net is larger than
the editing buffer.
JUMP FUNCTION
MISSING
If the specified JMP instruc-
tions are insufficient, add
JMP instructions at proper
locations. Delete any un-
necessary JMPE instruc-
tions.
The functional instruction
JMP(SUB10) is not correct-
ly dealt with.
Correspondence of JMP
and JMPE(SUB30) is incor-
rect.
The number of coil to jump
is specified by the model
which the number of coil
cannot specified.
LADDER BROKEN Delete the entire ladder pro-
gram once, then re–crate a
ladder program.
LADDER is broken.
LADDER ILLEGAL Modify the ladder. There is an incorrect LAD-
DER.
IMPOSSIBLE
WRITE
The ladder on the ROM can-
not be edited.
You try to edit sequence
program on the ROM.
OBJECT BUFFER
OVER
Please reduce the LAD-
DER.
The sequence program
area was filled.
PARAMETER
NOTHING
Enter necessary parame-
ters.
There is no parameter of the
functional instruction.
PLEASE
COMPLETE NET
After correcting the error
net, please continue operat-
ing.
The error net was found in
LADDER.
PLEASE KEY IN
SUB NO.
If you do not input the func-
tional instruction, please
push soft key “FUNC again.
Please input the number of
the functional instruction.
PROGRAM
MODULE NOTHING
Use a RAM for debugging or
a ROM for sequence pro-
grams.
You tried to edit though
there was neither RAM for
debugging nor ROM for se-
quence program.
RELAY COIL
FORBIT
Delete an unnecessary
relay or coil.
There is an unnecessary
relay or coil.
RELAY OR COIL
NOTHING
Add a relay or coil. The relay or the coil does
not suffice.
PLEASE CLEAR
ALL
Please clear the all data. It is impossible to recover
the sequence program.
SYMBOL DATA
DUPLICATE
If a problem occurs due to
simultaneous operation,
change the symbol to an un-
used one.
The same symbol name is
defined in other place.