10. PMC
657
Display messages and the meanings
Display
messages
Meanings
INACTIVE The communication is inactive.
STOPPING The communication is being stopped.
(Wait for the termination of communication)
STARTING The communication is being started.
(Wait for the termination of communication over another
communication path)
STAND–BY The communication is active and in standby mode.
CONNECTED The communication is active and being connected.
NO OPTION The port can be not opened because there is not option of
RS–232C.
BAD PARAMETER Invalid open parameters are specified.
TIMEOUT ERROR A time–out has occurred and communication is aborted.
TIMEOUT(K)
ERROR
A time–out has occurred and communication is aborted.
BCC ERROR A Block Check Code (packet parity) error has occurred.
PARITY ERROR A parity error has occurred.
OVER–RUN
ERROR
A reception overrun has occurred and the communication
can not recover.
SEQUENCE
ERROR
Packets are out of sequence.
(Incorrect procedure)
DATA ERROR Incorrect packets have been received through retry
process.
QUEUE
OVERFLOW
The transmit/receive queue has overflowed.
DISCONNECTED Communication has been terminated successfully.
NO CONNECTION The cable is disconnected.