1
1.6 Screen Operation Associated with
<OFFSET SETTING>
38
C
(Software operator’s panel general–purpose switch screen)
: J OFF ON
: J OFF ON
: J OFF ON
: J OFF ON
: J OFF ON
: J OFF ON
: J OFF ON
: J OFF ON
ACTUAL POSITION (ABSOLUTE)
X 0.000 Y 0.000
Z 0.000 B 0.000
>_
MACRO
[][][][][]
MENU OPR
OPERATOR’S PANEL 01234 N12345
MDI **** *** *** 16:05:59
(2) Related signals
#7
#6 #5 #4 #3 #2 #1 #0
F072
OUT7 OUT6 OUT5 OUT4 OUT3 OUT2 OUT1 OUT0
F073
ZRNO MD4O MD2O MD1O
F075
SPO KEYO DRNO MLKO SBKO BDTO
F076
ROV2O ROV1O
MP2O MP1O
F077
RTO
HS1DO HS1CO HS1BO HS1AO
F078
*FV7O *FV6O *FV5O *FV4O *FV3O *FV2O *FV1O *FV0O
F079
*JV7O *JV6O *JV5O *JV4O *JV3O *JV2O *JV1O *JV0O
F080
*JV15O *JV14O *JV13O *JV12O *JV11O *JV10O *JV9O *JV8O
F081
–J4O +J4O –J3O +J3O –J2O +J2O –J1O +J1O
(3) Cautions
D The function outputs the F signal according to screen operation. To
control the machine actually, the corresponding ladder needs to be
created.
D A feed operation (PRM7200#1, 7210–7217) along an axis with MDI
keys such as
is enabled only when the software
operator’s panel is displayed. (Output to <F081> is performed.)