OPERATION11. SETTING AND DISPLAYING DATA
B–63004EN/02
736
Tool position offset values along the Y–axis can be set. Counter input of
offset values is also possible.
Direct input of tool offset value and direct input function B for tool offset
measured are not available for the Y–axis.
Procedure for setting the tool offset value of the Y axis
1 Press function key
OFFSET
SETTING
.
2 Press the continuous menu key
several times until the screen
with soft key
[OFST.2] is displayed.
3 Press soft key
[OFST.2].
The Y axis offset screen is displayed.
OFFSET O0001 N00000
NO. Y
01 10.000
02 0.000
03 0.000
04 40.000
05 0.000
06 0.000
07 0.000
08 0.000
ACTUAL POSITION (RELATIVE)
U 100.000 W 100.000
>_
MDI **** *** *** 16:05:59
[ OFST.2 ][ W.SHFT ][ ][ ][ (OPRT) ]
3–1 Press soft key [GEOM] to display the tool geometry
compensation values along the Y–axis.
OFFSET/GEOMETRY O0001 N00000
NO. Y
G 01 10.000
G 02 0.000
G 03 0.000
G 04 40.000
G 05 0.000
G 06 0.000
G 07 0.000
G 08 0.000
ACTUAL POSITION (RELATIVE)
U 100.000 W 100.000
>_
MDI **** *** *** 16:05:59
[ WEAR ][ GEOM ][ ][ ][ (OPRT) ]
11.4.6
Y Axis Offset