1. Fanuc
  2. The Change of Soft-Key

The Change of Soft-Key Additional Manual Page 1

Additional Manual
TECHNICAL REPORT No. TMN 04/029 E
Date , 2004
General Manager of
CNC Laboratory
The change of the Soft-Key
1. Communicate this report to:
Your information
O GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
O Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Another Information
4. Attached Document
Drawing
No.
A-85310E Revision 01
CC: IL,ML Rep.No. CLB5-04/5009
CC: CLB1,CLB2,CLB3,CLB5 Date May. 7,2004
Original section of issue
Vice General
Manager
Department
Manager
Person in
Charge
FANUC
ADE
Previous page
Next page

Contents Summary of The Change of Soft-Key Additional Manual

  • Page 1TECHNICAL REPORT No. TMN 04/029 E Date , 2004 General Manager of CNC Laboratory The change of the Soft-Key 1. Communicate this report to: Your information O GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency End user 2. Summary for Sales Documents 3. Anothe
  • Page 2The change of the Soft-Key 1. Outline The Soft-Key on the display-panel will be changed as follows. 2. Applied Unit Series 16i/18i/21i-MODEL B Series 160i/180i/210i-MODEL B Series 160is/180is/210is-MODEL B Series 18i / 180i / 180is -M MODEL B5 Series 30i/31i/32i-MODEL A Series 300i/310i/320i-MODEL A