1. DISPLAY AND OPERATION
B–63525EN/02
152
[NC system] menu screen
PERIODICAL MAINTENANCE O0001 N12345
(NC)
ITEM NAME
01 BATTERY FOR CONTROLLER
02 BATTERY FOR PULSECODER
03 FAN MOTOR
04 LCD BACK LIGHT
05
06
07
08
09
10
>_
EDIT *** ***** *** **** 19:27:05
[ ][ STATUS ][ MACHIN ][ NC ][ (OPRT) ]
[ SELECT ][ ][ ][ ][ ]
[ ][ ][ ][ CAN ][ EXEC ]
NOTE
On the NC system screen, no item name can be registered,
erased, input, or output.
(2)MDI keypad–based setting
An item name can be registered on the status screen by first entering
it in the following format using keys, then pressing soft key
[INPUT] (or the
INPUT
key).
Pressing soft key [+INPUT] adds the item name to the list of
previously registered item names.
Alphanumeric characters*two–byte characters*alphanumeric characters
The two–byte characters shall comply with the FANUC code. (See
Section 1.19.6.)
When entering a two–byte character using keys, sandwich it with
an “*” pair.
The item name can consist of up to 24 alphanumeric characters (if
no two–byte character is included) or 12 two–byte characters (if no
alphanumeric character is included).
Example) To register “LCD backlight,” enter:
>LCD*110E10F410CC114010B610FE_
Format