5. MATTERS COMMON TO BOTH LCD–MOUNTED TYPE
AND STAND–ALONE TYPE i SERIES (HARDWARE)
B–63525EN/02
376
The control units and various peripheral units supplied from FANUC are
designed assuming that those units are accommodated in enclosed
cabinets. The cabinets mentioned here include:
D Cabinet that is manufactured by a machine tool builder to house
control units and peripheral units
D Operation pendant that is manufactured by a machine tool builder to
house control units and an operator’s panel
D Similar products
The table below indicates the environment conditions for installing
control units in these cabinets.
Condition Display LCD–
mounted type
control unit and
display unit (ex-
cluding units with
a data server)
Display stand–
alone type con-
trol unit
Ambient
Operating 0°C to 58°C 0°C to 55°C
temperature of
units
Storage and trans-
portation
–20°C to 60°C
Change in temper-
ature
1.1 °C/minute max.
Humidity
Normal Relative humidity: 75% or less
No condensation
Short term (not ex-
ceeding 1 month)
Relative humidity: 95% or less
No condensation
Vibration
Operating 0.5 G or less
Non–operating 1.0 G or less
Height above sea
Operating Up to 1000m
level
Non–operating Up to 12000m
Atmosphere Normal machine plant environment
(When a control unit is used in an environ-
ment where the control unit is exposed to a
high level of dust and a high concentration
of coolants an organic solutions, a separate
study is required.)
5.7
ENVIRONMENTAL
CONDITIONS
OUTSIDE CABINET