Available ATA Flash Cards and Compact Flash Cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 04/126 E
Date 13 Dec., 2004
General Manager of
CNC Laboratory
Available ATA Flash cards and Compact Flash cards with
FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A
1. Communicate this report to :
Your information only
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
TECHNICAL REPORT No. TMN04/113E is revised.
4. Attached Document
Drawing
No.
A-65555E (Edit. 02)
Order section of issue
ADE A.G.M.
Department
Mana
g
er
Section
Mana
g
er
Person in
char
g
e
FANUC

Contents Summary of Available ATA Flash Cards and Compact Flash Cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.TMN 04/126 E Date 13 Dec., 2004 General Manager of CNC Laboratory Available ATA Flash cards and Compact Flash cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A 1. Communicate this report to : ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics
  • Page 2The following table shows that the ATA Flash cards and Compact Flash cards, which are available to the FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A, are confirmed by FANUC. The marks on the table mean below. Available : The card confirm to be worked by FANUC - : No planning to test CF : Co
  • Page 3note3 FANUC cancels the recommendation of SanDisk’s Compact Flash cards, because those which were shipped from the end of 2003, may not work in Data Server. Even identification of the card is not possible when the above Compact Flash card is used. But if you have already used same specification card