B-66264EN/01 APPENDIX E.PARAMETERS
- 115 -
#3 LCLLV If an execution macro is called as a subprogram from a user program
(subprogram call using a M/S/T/second auxiliary function/specific
code), the local variable level:
0: Does not change.
(The local variable at the calling source is used.)
1: Changes.
(The local variable at the called destination is used (FS16
compatible mode)).
#4 P98 The execution macro for P-CODE workpiece number search is:
0: Called as a macro.
The local variable used with the execution macro cannot be used
with the main program.
1: Called as a subprogram.
The local variable used with the execution macro is passed to the
main program.
#7 #6 #5 #4 #3 #2 #1 #0
9167 NVGA INCD NTV
[Data type] Bit
#0 NTV When an "LF" is output with G336 (data transmission), a space for a
TV check is:
0: Output.
1: Not output.
#3 INCD The coordinates (X,Y,I,J) in the character coordinate system or
graphic coordinate system are:
0: Specified in the absolute specification mode at all times.
1: Switchable between the absolute specification mode and
incremental specification mode with G390/G391. (Valid for
G204, G230, G242, G243, G300, G249, G250, G01, G02, G03,
G206, and G317)
#4 NVGA This parameter is used with applications created for character cards of
the old type, and is usually set to 0.
0: Normal mode
1: Equivalent to character cards (All graphic commands are
ignored.)