10. TOOL FUNCTIONS
B--63003EN--1/02
924
#7 #6 #5 #4 #3 #2 #1 #0
5003 CCN SUV SUP
[Data type] Bit
SUP Start up or cancel in cutter compensation C
0 : Type A
1 : Type B
SUV When G40, G41, and G42 are specified independently,
0 : The start up and cancel operation conforms to the standard
specification.
1 : Moves by a distance corresponding to the offset vector which is
vertical to the next block movement.
CCN When automatic reference position return (G28) is specified in the cutter
compensation C mode (M series) or in tool nose radius compensation (T
series):
0 : The cutter compensation vector is cancelled in movement to an
intermediate position.
1 : The cutter compensation vector is not cancelled in movement to an
intermediate position, but is cancelled in movement to the reference
position.
5010 Limit value that ignores the vector when a tool moves on the outside of a corner
during cutter compensation C
[Data type] Word
Increment system IS--A IS--B IS--C Unit
Metric input 0.01 0.001 0.0001 mm
Inch input 0.001 0.0001 0.00001 inch
[Valid data range] 0 to 16383
This parameter sets the limit value that ignores a slight movement
occurring when a tool moves on the outside of the corner during cutter
compensation C.
[Unitofdata]