B-70315EN/02 7.UNITS
- 183 -
(b) Function setting method
Change the operation command destination
(operator
→
control terminal).
<1> The extended function mode is displayed.
(A--- is displayed.)
Display "A---" according to the display method of (1).
Initially, the operation command destination is operator, so
the operation command indication lamp is turned on.
<2> The code No. of the function mode is displayed.
(A001 is displayed.)
Press the key.
Press the key.
(A002 is displayed.)
Press the key.
<3> Function mode data display
<5> The extended function mode is displayed. (A--- is
displayed.)
Press the key.
From this state, a transition can be made to another
extended function mode, the monitor mode, or basic
mode.
<4> The code No. of the monitor mode is displayed.
(A002 is displayed.)
Modified setting data is set by pressing the key.
The operation command indication lamp is turned off
because the operation command destination is changed to
control terminal.
From this state, a transition can be made to another function
code.
Press the key.
Press the key.
s the operation command destination, the
initial data 02 (operator) is displayed.
PRG (program) is turned on because
function mode data is displayed.
The operation command destination is
changed to control terminal (01).