PROGRAMMING20. AXIS CONTROL FUNCTIONS
B–63534EN/02
574
M03 ; Clockwise spindle rotation command
G81 T_ L_ R1 ; Synchronization start command
G00 X_ ; Positions the workpiece at the machining position.
Machining in the synchronous state
G00 X_ ; Retract the workpiece from the tool.
G81 T_ L_ R1 ; Synchronization ratio change.
G00 X_ ; Positions the workpiece at the machining position.
Machining in the synchronous state
G00 X_ ; Retract the workpiece from the tool.
G80 R1 ; Synchronization cancel command
M03 ; Clockwise spindle rotation command
G00 G90 C_ ; C–axis positioning
G81 T_ L_ R2 ; Synchronization start command
G00 X_ ; Positions the workpiece at the machining position.
Machining in the synchronous state
G00 X_ ; Retract the workpiece from the tool.
G81 T_ L_ R2 ; Synchronization ratio change.
G00 X_ ; Positions the workpiece at the machining position.
Machining in the synchronous state
G00 X_ ; Retract the workpiece from the tool.
G80 R2 ; Synchronization cancel command
Examples
D Acceleration/deceleration
type
D Acceleration/deceleration
plus automatic phase
synchronization type