OPERATION8. DATA INPUT/OUTPUT B–63534EN/02
924
File format and error messages
All files that are read from and written to a memory card are of text format.
The format is described below.
A file starts with % or LF, followed by the actual data. A file always ends
with %. In a read operation, data between the first % and the next LF is
skipped. Each block ends with an LF, not a semicolon (;).
⋅ LF: 0A (hexadecimal) of ASCII code
⋅ When a file containing lowercase letters, kana characters, and several
special characters (such as $, \, and !) is read, those letters and
characters are ignored.
Example:
%
O0001(MEMORY CARD SAMPLE FILE)
G17 G49 G97
G92 X–11.3 Y2.33
⋅
⋅
M30
%
⋅ ASCII code is used for input/output, regardless of the setting
parameter (ISO/EIA).
⋅ Bit 3 of parameter No. 0100 can be used to specify whether the end of
block code (EOB) is output as ”LF” only, or as ”LF, CR, CR.”
If an error occurs during memory card input/output, a corresponding error
message is displayed.
EDIT
*** **** *** ****
15:40:21
M–CARD ERROR
FILE No. = 1 PROGRAM No. =13
>_
0028 O0003 777382 01–06–14
F SET EXECSTOPO SET CAN
~ ~
represents a memory card error code.
Format
Error messages