Arbitrary position reference setting for Cs axis function Additional Manual Page 1

Additional Manual
2001/01/24
Edit
EditEdit
Edit
1/2
Data
DataData
Data Si
g
nature
Si
g
natureSi
g
nature
Si
g
nature
Descri
p
tion
Descri
p
tionDescri
p
tion
Descri
p
tion
FANUC Series 16i/18i-MA
Arbitrary position reference setting for Cs axis function
A-78380EN
Drawing No.
Title
Page
Contents
1. OUTLINE
2
22
2
2. PARAMETER
2
22
2
3. NOTE
2
22
2
FANUC Series 16i/18i-MA
Arbitrary position reference setting for Cs axis function
Specifications

Contents Summary of Arbitrary position reference setting for Cs axis function Additional Manual

  • Page 1FANUC Series 16i/18i-MA Arbitrary position reference setting for Cs axis function Specifications Contents 1. OUTLINE 2 2. PARAMETER 2 3. NOTE 2 Title FANUC Series 16i/18i-MA Arbitrary position reference setting for Cs axis function Drawing No. A-78380EN Page Edit Data Signature Description 1/2 2001/
  • Page 21. Outline When the parameter CRF(No.3700#0) is set to 1, in the first reference position return command (G28 or manual reference position return) after the serial spindle is changed to the Cs contour control mode, the arbitrary position can be set as a reference position. When the first reference p