11. TOOL FUNCTION
This function ignores the T command. Whether the T command is
ignored or not is generally selected by a switch on the machine operator’s
If the T command is ignored, it is treated, as if no T code command were
present on a program. Accordingly, it is not checked that whether the T
code be commandable or not.
The ignorance of T command is judged when the command
is read from a tape reader or memory into buffer register.
Accordingly, the selection of the T command ignorance
switch is not effective for the block that has been read into
the buffer register.
By setting a parameter TNM (No. 16260#5), it is checked
that whether the T code be commandable or not, only in the
machine lock status.