OPERATION4. AUTOMATIC OPERATION
B–63684EN/01
420
2–4 Move the cursor to the mirror image setting position, then set
the target axis to 1.
3 Enter an automatic operation mode (memory mode or MDI mode),
then press the cycle start button to start automatic operation.
⋅ The mirror image function can also be turned on and off by setting bit
0 of parameter 0012 to 1 (on) or 0 (off).
⋅ For the mirror image switches, refer to the manual supplied by the
machine tool builder.
Operations, such as manual operaton, automatic reference position return,
movement in repositioning, and movement related to tool position
compensation and C–axis position compensation cannot be reversed.
Explanations
Limitations