OPERATION8. DATA INPUT/OUTPUT
The value of a custom macro common variable (#500 to #999) is loaded
into the memory of the CNC from a floppy or NC tape. The same format
used to output custom macro common variables is used for input. See
8.7.2. For a custom macro common variable to be valid, the input
data must be executed by pressing the cycle start button after data is input.
When the value of a common variable is loaded into memory, this value
replaces the value of the same common variable already existing (if any)
Inputting custom macro common variables
1 Input the program according to the procedure in Section 8.4.1.
2 Press the MEMORY switch on the machine operator’s panel upon
3 Press the cycle start button to execute the loaded program.
4 Display the macro vriable screen to chek whether the values of the
common variables have been set correctly.
Display of the macro variable screen
⋅ Press function key
⋅ Press the rightmost soft key (next–menu key).
⋅ Press soft key
⋅ Select a variable with the page keys or numeric keys and
The common variables (#500 to #531) can be input and output.
When the option for adding a common variable is specified, values from
#500 to #999 can be input and output. Common variables #100 to 199
cannot be input or output.
D Common variables