OPERATION8. DATA INPUT/OUTPUT
A program can be input and output using the ALL IO screen.
When entering a program using a cassette or card, the user must specify
the input file containing the program (file search).
1 Press soft key [PRGRM] on the ALL IO screen, described in Section
EDIT mode. A program directory is displayed.
3 Press soft key
[(OPRT)]. The screen and soft keys change as shown
⋅ A program directory is displayed only in EDIT mode. In all other
modes, the ALL IO screen is displayed.
**** *** *** ***
F SRH READ PUNCH (OPRT)
PROGRAM (NUM.) MEMORY (CHAR.)
USED : 60 3321
FREE : 2 429
O0010 O0001 O0003 O0002 O0555 O0999
O0062 O0004 O0005 O1111 O0969 O6666
O0021 O1234 O0588 O0020 O0040
4 Enter address N.
5 Enter the number of the file to be found.
The first floppy file is found.
⋅ One of N1 to N9999
Among the files numbered from 1 to 9999, a specified file is found.
The file immediately after that used most recently is found.
When –9998 is specified, the next file is found. Then, each time
a file input/output operation is performed, N–9999 is automatically
inserted. This means that subsequent files can be sequentially
This state is canceled by specifying N0, N1 to N9999, or N–9999,
or upon a reset.