OPERATION8. DATA INPUT/OUTPUT
Inputting a file
1 Press the rightmost soft key (next–menu key) on the ALL IO
screen, described in Section 8.11.1.
2 Press soft key
3 Select EDIT mode. The floppy screen is displayed.
4 Press soft key
[(OPRT)]. The screen and soft keys change as shown
The floppy screen is displayed only in EDIT mode. In all other
modes, the ALL IO screen is displayed.
READ/PUNCH (FLOPPY) O1234 N12345
**** *** *** ***
F SRH READ PUNCH
5 Press soft key [READ].
6 Enter the number of a file or program to be input.
⋅ Setting a file number: Enter the number of the desired file, then
press soft key
⋅ Setting a program number: Enter the number of the desired
program, then press soft key
7 Press soft key
The specified file or program is read, and the ”INPUT” indicator
blinks at the lower–right corner of the screen. Upon the completion of
input, the ”INPUT” indicator is cleared from the screen.
EXECCANF SET O SET STOP