OPERATION8. DATA INPUT/OUTPUT
INSERT MEMORY CARD. No memory card is inserted.
UNUSABLE MEMORY CARD The memory card does not contain device information.
FORMAT MEMORY CARD. The memory card is not formatted. Format the memory card before use.
THE FILE IS UNUSABLE. The format or extension of the file to be loaded is invalid. Alternatively, the
data stored on the memory card does not match the CNC memory size.
REPLACE MEMORY CARD. Replace the memory card.
FILE SYSTEM ERROR VVV An error occurred during file system processing. VVV represents a file
system error code.
SET EMERGENCY STOP STATE. Save/load operation is enabled in the emergency stop state only.
WRITE–PROTECTED Save operation: The protect switch of the memory card is set to the
Load operation: Parameter write is disabled.
VOLTAGE DECREASED. The battery voltage of the memory card has dropped. (The battery
DEVICE IS BUSY. Another user is using the memory card. Alternatively, the device cannot
be accessed because automatic operation is in progress.
SRAM ³ MEMORY CARD? This message prompts the user to confirm the start of data saving.
MEMORY CARD ³ SRAM? This message prompts the user to confirm the start of data loading.
DO YOU WANT TO DELETE FILE(S)? This message prompts the user to confirm the start of deletion.
DO YOU WANT TO PERFORM FORMAT-
This message prompts the user to confirm the start of formatting.
SAVING Saving is currently being performed.
LOADING Loading is currently being performed.
DELETING File deletion is currently being performed.
FORMATTING Memory card formatting is currently being performed.
COMPLETED Save or load processing has been completed.
PRESS RESET KEY. Press the RESET key.
TURN OFF POWER. Turn the power off, then back on again.