OPERATION11. SETTING AND DISPLAYING DATA
B–63684EN/01
632
4 Move the cursor to an item to be changed.
Method 1
Move the cursor to the item to be changed with the page keys and
cursor keys.
Method 2
Change the mode of the soft keys to the operation selection mode
using the [(OPRT)] soft key. Enter the registration number of the
tool for which data is to be changed, then press the [NO.SRH] soft
key. Move the cursor to the tool registration data to be changed
with the cursor keys.
5 For absolute programming, enter the data and press the [INPUT]
soft key.
For incremental programming, enter an increment or decrement
and press the [+INPUT] soft key.
Sub-tool registration data items to be entered are as follows:
(a) Sub-tool number
Specify sub-tool numbers used for controlling multiple tools. Up to
64 numbers can be specified. Settings range from 0 to 99.
(b)Angle
Specify angles used for indexing the turret for sub-tools. Settings
range from –359999 to +359999.
(c) Y-axis offset
Specify tool position compensation for sub-tools along the Y-axis in
the machine coordinate system. Settings range from –99999999 to
+99999999.
When the optional graphics function is used, the figures of sub-tools
registered to the tool number registration screen for multiple tools (see
Item 11.4.3.6) can be specified. These figures are drawn with the graphics
function.
(1)Displaying the screen
1 Press the
OFFSET
SETTING
function key.
2 Press the
menu key several times until the [M.TOOL] soft
key appears.
3 Press the [M.TOOL] soft key. Then press the [SHAPE] to display
the tool figure registration screen for multiple tools.
11.4.3.7
Displaying and setting
items on the tool figure
registration screen for
multiple tools (for
drawing figures)