B–63503EN–1/01
12. DISPLAY/SET/EDIT
623
Indication of the current position can be suppressed by setting bit 0
(NDPx) of parameter No. 3115, or by issuing the position indication
ignore signal.
Bit 1 (NDAx) of parameter No. 3115 enables the display of positions in
the machine coordinate system only.
[Classification] Input signal
[Function] Disables the display of the current position.
A separate signal is provided for each controlled axis. The number at the
end of each signal name denotes the controlled axis number.
NPOS1
1
⋅⋅⋅1st axis current position display
2
⋅⋅⋅2nd axis current position display
3
⋅⋅⋅3rd axis current position display
4
⋅⋅⋅4th axis current position display
[Operation] While a signal is set to 0, the current position in the corresponding axis
is displayed. While the signal is set to 1, the current position along the
corresponding axis is not displayed.
#7 #6 #5 #4 #3 #2 #1 #0
G198 NPOS4 NPOS3 NPOS2 NPOS1
12.1.10
Position Display
Neglect
General
Signal
Position Display Neglect
Signal
NPOS1~NPOS4<G198>
Signal address