11. CONTROL FUNCTION
B–63683EN/01
194
[Classification] Output signal
[Function] Indicates to the PMC when the machine is ready for a multiple–workpiece
machining skip.
[Output condition] This signal becomes 1 at the end of a block where the multiple–workpiece
machining skip signal is input. It becomes 0 at the start of the next cycle.
[Classification] Output signal
[Function] Indicates to the PMC when a multiple–workpiece machining skip is
completed.
[Output condition] If the RVSARV signal is 1, the RVSSKE signal becomes 1 at the
completion of a skip after a cycle is started. It becomes 0 at the start of the
next cycle.
[Classification] Input signal
[Function] Specifies whether to perform a multiple–workpiece machining skip.
[Output condition] When this signal is 1, a multiple–workpiece machining skip is performed.
#7
G248
#6 #5 #4 #3
MGSKP
#2 #1 #0
#7
F225
#6 #5 #4 #3 #2
RVSSKE
#1 #0
RVSARV
Signal
Multiple–workpiece
machining skip
preparation signal
RVSARV<F225#0>
Multiple–workpiece
machining skip
completion signal
RVSSKE<F225#2>
Multiple–workpiece
machining skip signal
MGSKP<G248#3>
Signal address