B–63522EN/02
27. DISPLAYING AND SETTING DATA
NC FUNCTION
351
In this function, functions of switches on the machine operator’s panel is
done by operation on the MDI panel. Mode selection and jogging
override, etc. can be operated by setting operation via the MDI panel with
this function, thus allowing commitance of corresponding switches on the
machine operator’s panel.
This function is valid only when the screen is displayed with operator’s
panel. Move cursor with the cursor operation keys, and select various
operations, viewing the screen.
The following operations can be done via the MDI panel:
A Model selection
B Manual pulse generator feed axis selection (available only with
manual handle 1)
Move distance selection per pulse of manual pulse generator
C Rapid traverse override
Jogging speed override
Feedrate override
D Optional block skip (Block delete)
Single block
Machine lock
Dry run
E Memory protect
F Feed hole
G Jogging/incremental feed axis direction selection
Manual rapid traverse selection
H General-purpose switch: Eight general-purpose switches are provided
and each of these
switches can be named by up to eight alphanumeric characters.
There is a parameter per groups A to G shown above, which decides
validity of operation function by MDI panel.
OPERATOR’S PANEL O0000 N00000
MODE : MDI AUTO EDIT STEP JOG ZRN
STEP MULT. : *1 *10 *100
RAPID OVRD. : 100% 50% 25% F0
JOG FEED : 1.0%
****************
FEED OVRD. : 140%
******
ACTUAL POSITION (ABSOLUTE)
X 0.000 Z 0.000
S 0 T0000
EDIT **** *** *** 09:36:48
[ MACRO ][ ][ OPR ][ TOOLLF ][ ]
27.5
SOFTWARE
OPERATOR’S PANEL