B–63522EN/02
Index
i–7
Servo/Spindle Motor Speed Detection, 429
Setting a Workpiece Coordinate System (Using G54
to G59), 100
Setting a Workpiece Coordinate System (Using G92)
(with G Code System A: G50), 97
Setting and Display Unit, 337, 338
Setting the Embedded Ethernet Function, 376
Setting the Reference Position without Dogs, 89
Simple Electric Gear Box (G80, G81) (M series), 297
Simple Spindle Synchronous Control, 121
Simple Synchronous Control, 285
Simultaneous Input and Output Operations (At 1–path
Control) (M series), 332
Single Block, 335
Single Direction Positioning (G60) (M series), 46
Skip Function (G31), 237
Skip Function for EGB Axis, 298
Slanted Axis Control, 293
Slope Compensation, 222
Smooth Interpolation (G05.1) (M series), 63
Software Operator’s Panel, 351
Spindle Adjustment Screen, 363
Spindle Electronic Gear Box (M series), 303
Spindle Functions, 113
Spindle Monitor Screen, 364
Spindle Orientation, 121
Spindle Output Control by the PMC, 114
Spindle Output Switching, 121
Spindle Override, 115
Spindle Position Data Display, 122
Spindle Positioning (T series), 116
Spindle Setting Screen, 363
Spindle Speed Analog Output (S Analog Output), 114
Spindle Speed Fluctuation Detection (G25, G26), 117
Spindle Speed Serial Output (S Serial Output), 114
Spindle Synchronization Control, 121
Spiral Interpolation, Conical Interpolation (M series),
65
Stand–alone Type Small MDI Unit, 340
Stand–alone Type Standard MDI Unit (Horizontal
Type), 341
Stand–alone Type Standard MDI Unit (Vertical Type),
342
Start Lock, 427
Status Output, 430
Stock Removal in Facing (G72), 161
Stock Removal in Turning (G71), 157
Stored Pitch Error Compensation, 220
Stored Stroke Check 1, 419
Stored Stroke Check 2 (G22, G23) (M series), 420
Stored Stroke Checks 2 and 3 (G22, G23) (T series),
421
Stored Stroke Checks 3 (M series), 420
Straightness Compensation, 222
Stroke Limit Check Before Movement, 422
Sub Program, 134
Substitution of the Number of Required Parts and
Number of Machined Parts, 436
Super CAPi M, 475
Super Capi T, 460
Supported Machine Tools, 469
Surface Grinding Canned Cycle (M series), 180
Symbol Capi T, 453
Synchronization Control (Only at 1–path Control) (T
series), 286
Synchronization Function, 311
Synchronization/Mix Control (T series), 314
System Configuration Display Function, 365
System in Which a commercially Available Personal
Computer and the CNC are Connected Via the
High–Speed Serial BUs, 445
[T]
T Code Output, 124
T series, 37, 492, 499
Tandem Control, 294
Tangential Speed Constant Control, 76
Tape Codes, 135
Tape Format, 138
Tape Horizontal (TH) Parity Check and Tape Vertical
(TV) Parity Check, 138
Tapping Mode (G63) (M series), 85
Tapping Signal, 432
Temporary Absolute Coordinate Setting, 306
Thread cutting, 70
Thread Cutting Cycle (G76), 166
Thread Cutting Cycle (G78) (with G Code System A:
G92), 154
Thread Cutting Cycle Retract (T series), 327
Thread Cutting Signal, 432
Three–dimensional Coordinate Conversion (G68,
G69) (M series), 235