FS 0-PB/Series 0130 Ediition 07, Concerning trouble of press start signal (PF) A-63637 Additional Manual Page 1
Additional Manual
TECHNICAL REPORT (MANUAL)
Date2 July,1998
General Manager of
FL Laboratory
FANUC Series 0-PB/series 0130 edition 07
Concerning trouble of press start signal (PF)
Communicate this report to:
○ Your information only
○ GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
○ Machine tool builder
Sales agency
End user
Summary for Sales Documents
Notice
Attached Document
Drawing
No.
Original section of issue
General
Manager
A. General
Manager
Department
Manager
Section
Manager
IDE
Contents Summary of FS 0-PB/Series 0130 Ediition 07, Concerning trouble of press start signal (PF) A-63637 Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) Date 2 July, 1998 General Manager of FL Laboratory FANUC Series 0-PB/series 0130 edition 07 Concerning trouble of press start signal (PF) Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder S
- Page 2FANUC Series 0-PB / series 0130 edition 07 Concerning trouble of press start signal (PF) 1. Outline The series 0130 edition 07 for FANUC Series 0-PB has a trouble that the press start signal (PF) can not be turned off by the reset operation. This report shows about the generating condition of troubl