PROGRAMMING
12. COMPENSATION FUNCTION
B–63664EN/02
200
When G29 is specified in cutter compensation C mode, an operation of
FS15 type is performed if CCN (bit 2 of parameter No. 5003) is set to 1.
This means that an intersection vector is generated in the previous block,
and vector cancellation is performed when a movement to an intermediate
position is performed. When movement from the intermediate position
to the return position is performed, the vector is restored; an intersection
vector is generated between the block and the next block.
(1)G29 specified in offset mode (with movement to both an intermediate
position and reference position performed)
(a) For specification made immediately after automatic reference
position return
When CCN (bit 2 of parameter No.5003)=0
O××××;
G91G41_ _ _;
G28X40.Y0;
G29X45.Y15.;
G29
[Type A]
r
s
(G42G01)
G01
G29
[Type B]
G28/30/30.1
s
(G42G01)
G01
s
s
s
G28/30/30.1
ss
s
Return position
Reference position or floating
reference position
Reference position or floating
reference position
Intermediate position
Return position
Intermediate
position
When CCN (bit 2 of parameter No.5003)=1
G29
[FS15 Type]
G28/30/30.1
(G42G01)
G01
s
r
s
s
s
Return position
Reference position or floating
reference position
Intermediate
position
D G29 command in cutter
compensation C mode