PROGRAMMING 18. SPECIFYING THE LASER FUNCTION
The peak power that can actually be output is limited by the capacity of
the laser oscillator. Thus, the maximum and minimum peak powers that
can be specified are specified by parameters (PRM.15210 for the
maximum, PRM.15211 for the minimum).
Override can be applied to each of the items, peak power, pulse frequency,
and pulse duty.
Item Valid override range Unit
S_ 0 to 200% 1%
P_ 0 to 200% 1%
Q_ 0 to 150% 10%
Although the minimum unit of the pulse frequency is 1 Hz, the resolution
is 0.01 ms. The actual minimum unit depends on this resolution.
D Limitations on the output
D Pulse frequency