PROGRAMMING18. SPECIFYING THE LASER FUNCTION
#6 #5 #4 #3 #2 #1 #0
0 : Disables the beam delay function.
1 : Enables the beam delay function.
15219 Beam output condition delay time
[Unit of data ] 8msec or 2msec (depending on the batch transfer quantity)
[Valid data range] 0 to 8
Switching of beam output conditions is delayed by the time set in this
S This function is optional.
S Before this function can be used, the AI contour control or AI nano
contour control function option is required.
S When using this function, set the batch transfer quantity to 4. If other
than 4 is set, high–speed processing is not performed.
S This function is enabled for two–dimensional machining only.
S When using this function, disable AI contour control and AI nano
contour control for the Z–axis.