OPERATION5. TEST OPERATION
M, T, and B commands are executed in the machine lock state.
When a G27, G28, or G30 command is issued in the machine lock state,
the command is accepted but the nozzle does not move to the reference
position and the reference position return LED does not go on.
M00, M01, M02, M30, M98, M99, and M198 (subprogram calling
function) commands are executed even in the auxiliary function lock
state. M codes for calling a subprogram (parameters No. 6071 to 6079)
and those for calling a custom macro (parameter No. 6080 to 6089) are
D M, T, B command by only
D Reference position
return under Machine
D M codes not locked by
auxiliary function lock