OPERATION9. EDITING PROGRAMS B–63664EN/02
A new program can be created by moving part of a program.
Fig.9.6.3 Moving Part of a Program
In Fig.9.6.3, part B of the program with program number xxxx is moved
to a newly created program with program number yyyy; part B is deleted
from the program with program number xxxx.
Procedure for moving part of a program
1 Perform steps 1 to 5 in III–9.6.1.
2 Check that the screen for the program to be moved is selected and
press soft key
3 Move the cursor to the start of the range to be moved and press soft
4 Move the cursor to the end of the range to be moved and press soft key
[CRSR] or [BTTM](in the latter case, the range to the end of the
program is copied regardless of the position of the cursor).
5 Enter the number of the new program (with only numeric keys) and
6 Press soft key
Moving Part of