OPERATION11. SETTING AND DISPLAYING DATA B–63664EN/02
670
Displays the current position of the beam in a relative coordinate system
based on the coordinates set by the operator. The current position changes
as the beam moves. The increment system is used as the unit for numeric
values. The title at the top of the screen indicates that relative coordinates
are used.
Display procedure for the current position screen with the relative coordinate system
1 Press function key
POS
.
2 Press soft key
[REL].
3 On the 7 soft keys type, press the
[REL] soft key one more time to
display the coordinates along axes other than the six standard axes.
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [ OPRT ]
ACTUAL POSITION(RELATIVE) O1000 N00010
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000 MM/M S 0 T0000
X 123.456
Y 363.233
Z 0.000
See Explanations for the procedure for setting the coordinates.
11.1.2
Position Display in the
Relative Coordinate
System