OPERATION15. LASER FUNCTION
If the three–dimensional cutting function supports W–axis gap control,
setting the gap control feed signal to “1” selects the Z–axis as a gap control
axis. Activating Z–axis gap control enables the Z–axis to gap control
movement along the X– and Y–axes when they are operated manually.
Procedure for gap control axis switching
1 Turn on the gap control axis switching signal (G225#0 ZTRM).
2 Turn on the gap control start signal (G225#3 TCST).
3 Change the mode to JOG or HNDL and X and/or Y axes are moved by
This function cannot be executed when the manual operation in hand
When the gap control feed function is being executed, the Z-axis jog feed
signal is ignored.
GAP CONTROL AXIS