Connection of Servo Amplifier Additional Manual Page 1

Additional Manual
TITLE
DRAW
.
No.
1 / 6
Page
FANUC LTD
DESCRIPTION DESIGN DATE
EDIT
Connection of servo amplifier βiSVSP
and power failure backup module
A
-72562-031
Connection of servo amplifier βiSVSP and power failure backup module
1. Type of applied documents
Name
FANUC SERVO AMPLIFIER β
iSV series DESCRIPTIONS
Spec. No./Ver. A-72562-031
2. Summary of Change
Group
Name / Outline New, Add
Correct, Del
Applicable
Date
Basic Function
Optional
Function
Unit
Maintenance
Parts
Notice
Correction
Another
Connection of servo amplifier β
iSVSP
and power failure backup module
New 2005. 8
01
05.08.08
K.Inaba Add newly

Contents Summary of Connection of Servo Amplifier Additional Manual

  • Page 1Connection of servo amplifier βiSVSP and power failure backup module 1. Type of applied documents Name FANUC SERVO AMPLIFIER βiSV series DESCRIPTIONS Spec. No./Ver. A-72562-031 2. Summary of Change Group Name / Outline New, Add Applicable Correct, Del Date Basic Function Optional Function Unit Maint
  • Page 2Connection of servo amplifier βiSVSP and power failure backup module 1. Overview This documents describes about the connection of βiSVSP and power failure backup module. Please also refer to DESCRIPTIONS (A-53866-464) for the details. All specifications and designs are subject to change without noti
  • Page 32. Connection diagram Connection of servo amplifier βiSVSP TITLE and power failure backup module DRAW. No. A-72562-031 EDIT DATE DESIGN DESCRIPTION FANUC LTD Page 3/6
  • Page 43. Detail of cable connection Please refer to DESCRIPTIONS (A-53866-464) except for cables below. (1) Detail of cable K94 For power source (DC24V) cable of power failure backup module Power source Power failure (DC24V) backup module of third party CX14 24V (1) 24V K94 0V (2) 0V (3) Specifications of
  • Page 5<4> Retention time at an instantaneous power break 30 msec or greater * Generally, the retention time given on the catalog is the value assumed when the load factor is 100%. If the retention time requirement of 30 msec or greater is not satisfied, the retention time can be extended by reducing the l
  • Page 6(2) Detail of cable K95 Interface cable of βiSVSP and power failure backup module SVSP JX6 JX1A (9) *CRDY (9) (12) 0V (10) Connector Example (HONDA) Connector Example (HONDA) Connector PCR-E20FA Connector PCR-E20FA Hausing PCR-V20LA Hausing PCR-V20LA Cable specification: 0.09mm2 twisted pair sealed