Restrictions on connecting SPMi with CNC MODEL i-B Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) NO.: TMN 01/193E
Date: 6 December, 2001
General Manager of
Hardware Laboratory
Restrictions on connecting αi spindle amplifier with
FS16i/18i/21i/160i/180i/210i/160is/180is/210is -MODEL B
1. Communicate this report to :
Your information
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
TECHNICAL REPORT No. TMN 01/170E is revised.
4. Attached Document
Drawing No. A-80538E (1/1) Edition 02
No.HLB1-01/C004
6 December, 2001
Order section of issuer of issue
IDE
Assistant General Manager
Manager Chief

Contents Summary of Restrictions on connecting SPMi with CNC MODEL i-B Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) NO.: TMN 01/193E Date: 6 December, 2001 General Manager of Hardware Laboratory Restrictions on connecting αi spindle amplifier with FS16i/18i/21i/160i/180i/210i/160is/180is/210is -MODEL B 1. Communicate this report to : Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Roboti
  • Page 2Restrictions on connecting αi spindle amplifier with FS16i/18i/21i/160i/180i/210i/160is/180is /210is –MODEL B 1. Restrictions In the case of connecting αi spindle amplifier with FS16i/18i/21i/160i/180i/210i /160is/180is/210is -MODEL B, which are currently shipped, it has been found that there is a p