B–61804E–2/05
1. MEMORY COMPOSITION
VARIOUS FILE AND DATA
213
File area capacity is 64 k bytes (standard).
If additional submemory option is provided, the capacity is extended up
to 128 k bytes.
If option parameter was changed, turn off the power once, turn on power
again, and initialize the submemory. To initialize the submemory, select
[AUXILIARY] in the initial screen, input CFINT “INPUT”
to the question, “REQUEST = ”.
For details, see CHAPTER VII “AUXILIARY JOB”.
The standard values for the number of files able to be registered in
sub–memory are:
When there are no additional sub–memory: 30
When there are additional sub–memory: 40
However, it is possible to change these values when initializing
sub–memory, after pressing the “CFINT” to initialize sub–memory.
After pressing the “CFINT” to initialize sub–memory, the following
message will appear on the screen:
KEY IN “OK” OR “NO”
EXECUTION = OK <,NUMBER OF
MEMBER >
EXECUTION =
Usually “1” only is typed, however by using the EXECUTION = 1,
numeral , it is possible to register up to 99 files in sub–memory, as long
as the space remaining in the sub–memory is sufficient. The amount of
space in the sub–memory can be determined by displaying a list of stored
file names.
1.3
ADDITIONAL
PARAMETER OF
SUBMEMORY
1.4
NO. OF FILES
REGISTERABLE IN
SUB–MEMORY