VARIOUS FUNCTIONS AND
PRECAUTIONS OF Symbolic FAPT
B–61804E–2/05
1. VARIOUS FUNCTIONS OF
Symbolic FAPT
30
WARNING
Before starting machining based on the prepared NC data,
thoroughly check the contents of the NC data. Machining
with incorrect NC data may result in the tool colliding with the
workpiece and/or machine, or forced machining occurring,
possibly causing damage to the machine and/or tool itself,
or injury to the user.
This function is provided to correct one process only (if required) and
output to NC data of the process only after preparing all processes.
(1)Specification method
(a) Selection of functions
Select menu No.4 “MACHINING DEFINITION” and the
following message will be displayed on the soft key.
NEW
CORRECTION
CORRECTION & OUTPUT
This function is selected by pressing “correction and output”.
(b)Selection of process
All processes already defined are displayed in the page next to the
specification of [correction and output]. Select a desired process
by cursor key, and depress [NEXT PAGE] or [INPUT] key.
(2)Processing
The system sequentially asks questions about the specified process
preparation processing by the above specification. The process
preparation is completed after corresponding correction as required.
After this process preparation, processing automatically proceeds to
prepare NC data normally.
1.5
RE–OUTPUT OF NC
DATA BY EACH
PROCESS