B–63173EN/03
10. CONNECTION TO PERIPHERALS
383
Power Mate i JD42
(PCR–EV20MDT)
Relay connector for channel 1
(DBM–25S)
J146B
1 RDA 11 SDA
20V 120V
3 DRA 13 ERA
40V 140V
5 CSA 15 RSA
60V 160V
7 CDA 17 (SDB)
8 0V 18 (0V)
9 (RDB) 19
10 20
1FG 14
2 SDA 15
3 RDA 16
4 RSA 17
5 CSA 18
6 DRA 19
7 SG 20 ERA
8 CDA 21
922
10 23
11 24
12 25 +24V
13
24–VDC
power supply
Relay connector (FANUC purchase specification: A02B–0061–K201)
S D–SUB 25–pin female connector: DBM–25S (Japan Aviation
Electronics)
S Metal lock: D20418–J2 (Japan Aviation Electronics)
Cable–side connector (FANUC purchase specification: A02B–0118–
K895)
S D–SUB 25–pin male connector with a cover: DBM–25P (Japan
Aviation Electronics)
S Metal lock: DB–C2–J9 (Japan Aviation Electronics)
24–VDC power supply
Used for FANUC’s 24–V type I/O devices such as the Handy File
24 VDC "10% (including an instantaneous value and ripple)
This power can be supplied also via the power supply connector CP2
of the Power Mate.
The above cable is available from FANUC in a form of a punch panel (for
one channel).
The punch panel has a terminal block for connection to 24–VDC power
supply. A 24–VDC cable is required separately.
S Punch panel (for one channel), 1 m long: A02B–0259–C191
S Punch panel (for one channel), 2 m long: A02B–0259–C192
S Punch panel (for one channel), 5 m long: A02B–0259–C193
10.1.4
Details of
Single–Channel
Connection