B-63322EN/03 NC FUNCTIONS 25.DISPLAY AND SETTING
- 305 -
- External operator message, external alarm message display
- Actual speed and actual spindle speed
- Actual feedrate per minute (mm/min or inch/min)
- Actual spindle speed (min
-1
)
- Program check screen
The following are displayed on one screen.
- Program number on execution
- Sequence number on execution
- Program text on execution
- Current position
- Modal G codes
- Modal M codes
- T code
- Actual feedrate and spindle speed
- Status
- Operating monitor display
The load values (torque values) of spindle motor and servo motor are
displayed in bar chart.
The most recent sampling values are displayed in bar chart display. Set
the rated load value of motor corresponding to each load meter to
parameters.
The load meter displays 100% when the load value is the rated load
value.
The load meter can be displayed up to three servo motor axes and a
parameter
can be used to select any one of three axes.
- Displaying the alarm history
A maximum of 25 of the most recent alarms generated in CNC can be
recorded.
Each alarm record consists of the following items:
- Date and time
- Alarm number
- Alarm message
Any of the records can be deleted from the alarm history.
In addition, the operator message history can be displayed.
- Displaying external operator message history
The history of external operator messages can be stored. The stored
history can be displayed on the external operator message history
screen.