For the program screen
1 Place the CNC in the EDIT mode.
2 Press the function key
PROG
.
3 Press the continuous menu key at the right end of the soft key display.
4 Press the [PRGRM] soft key. The program screen appears.
5 Press the [(OPRT)] soft key.
6 Press the continuous menu key at the right end of the soft key display.
7 Press the [READ] soft key.
8 Type the O number of an NC program to be input, with the MDI keys.
[Input format]
<O–number>
9 Press the [EXEC] soft key.
10 During input, ”INPUT” blinks in the lower–right corner of the screen.
CAUTION
1 If the CNC memory holds an NC program that has the same
O number as that of an NC program to be input, the NC
program in the CNC memory is overwritten when bit 2 of
parameter No. 3201 is set to 1.
2 If an NC program is input when bit 0 of parameter No. 3201
is set to 1, all NC programs in the CNC memory are
automatically deleted before NC program input.
NOTE
The valid O number of a file to be input to the CNC memory
is Oxxxx (with xxxx representing a number) only.
A file (NC program) in the CNC memory can be output to the host
computer.
For the host file list screen
1 Place the CNC in the EDIT mode.
2 Display the host file list screen.
3 Press the [PUNCH] soft key.
4 Type the O number of an NC program to be output, with the MDI keys.
[Input format]
<O–number>
Procedure
8.5.2.5
NC program output
Procedure
GFKE-0222-EN
8. EMBEDDED ETHERNET FUNCTION
643