This manual describes the electrical and structural specifications required
for connecting the CNC control units, FANUC Series 15–MODEL
B/Series 150–MODEL B, with a machine tool, and covers the equipment
shown in the configuration diagram in Chapter 2. When using the CNC
control units, be sure to connect and install them following the
instructions in this manual. The manual outlines the units commonly used
for Fanuc CNC control units, that is, the I/O unit, servo motor, spindle
motor, and so on, and describes additional information on using these
units for the Series 15/150–B. Refer to individual manuals for the
detailed specifications of each unit.
Multiple models of Series 15/150–B products are provided so that they
correspond to various machine tools (lathe, machining center, etc.),
respectively. The description in this manual is common to these models.
Whenever each model has different restrictions, the abbreviation of the
model and notes are described. See the following table for the names and
abbreviations of the models described in this manual.
This manual comprises the following chapters and appendix.
This chapter. It describes the outline and organization of this manual,
names of models applied and other related manuals.
This chapter describes the configuration of the electrical system of the
machine tool with which the CNC is used.
This chapter describes how to install the CNC.
4. TOTAL CONNECTION
This chapter shows the connection diagrams for the CNC and each
5. POWER SUPPLY UNIT AND INPUT UNIT CONNECTION
This chapter describes the connection of the CNC to the power supply
unit and input unit.
6. CONNECTION OF I/O UNITS TO MACHINE INTERFACE
This chapter describes the connection of the CNC to the I/O unit to
Contents of this manual
How this manual is