PROGRAMMING 2. CONTROLLED AXES
B–64144EN/01
29
Item
0i Mate–MC
No. of basic controlled axes 3 axes
Basic simultaneously controlled axes 3 axes
NOTE
The number of simultaneously controllable axes for manual
operation jog feed, manual reference position return, or
manual rapid traverse) is 1 or 3 (1 when bit 0 (JAX) of
parameter 1002 is set to 0 and 3 when it is set to 1).
The names of three basic axes are always X, Y, and Z.
When this parameter is set to 0 or a character other than the valid
characters is specified, an axis name from 1 to 3 is assigned by default.
When a default axis name (1 to 3) is used, operation in the MEM mode
and MDI mode is disabled.
2.1
CONTROLLED AXES
2.2
AXIS NAME
Limitations
D Default axis name