1. DISPLAY AND OPERATION
When an option which uses the SRAM area is added, the system software
may require more SRAM than is currently installed in the system. In this
case, an allocation error screen appears the first time the system is turned
on after the addition of the option, thus restoring the state existing before
FILE ALLOCATION ERROR
S–RAM CAPACITY IS NOT SUFFICIENT.
ADDITIONAL S–RAM IS NECESSARY.
PLEASE PRESS <CAN> KEY :
RETURN TO THE STATE BEFORE
OPTION PARAMETER IS CHANGED.
When you have replaced the memory module because of
an insufficient SRAM area, first clear the SRAM area, and
input data again.
D Allocation error screen