Fanuc Power Mate i-D/H Maintenance Manual

1. DISPLAY AND OPERATION
B63175EN/03
82
The maintenance information screen is provided to record the history of
maintenance performed by a service person of FANUC or machine tool
builder.
The screen has the following features:
D MDI alphabetical input is allowed.
D The recording screen can be scrolled in units of lines.
D Edited maintenance information can be read and punched.
D The screen can be saved in FROM.
This function cannot be used with a combination of the DPL/MDI and its
operation package.
1. Press the
SYSTEM
function key.
2. Press the continuous menu key
several times. [MINFO] soft
key appears.
3. Press the [MINFO] soft key. The maintenance information screen
appears.
When selected, the maintenance screen shows the latest information.
The recording screen has an input area of 40 characters by 11 lines.
The status (mode, number of empty character spaces, cursor line, column
number) is displayed at the bottom of the screen.
MAINTENANCE INFORM
aaa
bbb
ccc
ddd
eee
fff
...
nnn
|OVER|EDIT|spaces:2078 33:1
40 characters
11 lines
1.14
MAINTENANCE
INFORMATION
SCREEN
1.14.1
Screen Display and
Operation
D Screen display

Leave a Reply

Your email address will not be published. Required fields are marked *